E07-m1101d Pinout |top| ✪

The module typically features a 2x4 (8-pin) DIP header, though some versions or similar models in the series may vary. It communicates with a microcontroller via a 4-wire SPI interface. Description VCC Power supply (1.8V to 3.6V) GDO0 General purpose digital output pin CSN SPI Chip Select (Active Low) SCK SPI Clock input MOSI SPI Master Out Slave In MISO/GDO1 SPI Master In Slave Out / General purpose output GDO2 General purpose digital output pin Key Technical Specifications

: Download Ebyte’s configuration software (RF_Setting.exe), experiment with GDO2 as an interrupt for packet reception, and explore the module’s wake-on-radio capabilities for battery-powered projects. e07-m1101d pinout

The e07-m1101d is often mistaken for having only 10 pins, but the is essentially another “pin” in terms of functionality. Most variants have: The module typically features a 2x4 (8-pin) DIP

The e07-m1101d’s pinout is standard for most SPI-based wireless modules. Here’s how to connect it to popular platforms: The e07-m1101d is often mistaken for having only

Unfortunately, the exact pinout for the e07-m1101d chip is not publicly available due to proprietary information. However, I can guide you through a general approach to finding and understanding the pinout: