Before proceeding, ensure you have a verified backup, stable power, and the correct firmware file for your exact device.

| Error Message | Meaning | Solution | |---------------|---------|----------| | "No match device" | Tool does not recognize your SSD | Use a different version of MPTool. Try v2.2.70, 2.2.71, or 2.2.73. | | "Fail to download firmware" | Incorrect firmware for your Flash ID | Extract your NAND flash ID using "Phison Flash ID" tool. You need a firmware pack that matches that exact Flash ID string. | | "SATA boot: Disk not ready" | Drive stuck in safe mode | Perform ROM mode shorting again. Ensure no other drives are connected. | | "Checksum error" | Corrupted firmware file | Re-download the tool. Disable antivirus temporarily. |

Прошивка SSD на контроллере PS3111 S11, SATAFIRM S11

: One of the most common reasons for using this tool is to fix drives that appear in the BIOS as "SATAFIRM S11". This status usually indicates a firmware panic or a failure that prevents the SSD from operating normally.