Nalco 73385 Msds Verified -

Based on the chemical identity of Nalco 73385 , this guide is designed to help you verify, interpret, and utilize the Material Safety Data Sheet (MSDS) — now internationally referred to as the Safety Data Sheet (SDS) . Product Identity: Nalco 73385 is typically identified as an Anionic Flocculant/Polymer (often a polyacrylamide-based copolymer). It is widely used in water treatment, mining, and paper processing as a settling aid or clarifier.

Guide: Nalco 73385 MSDS/SDS Verification & Safety Protocol Phase 1: Verification & Acquisition Since chemical formulations can vary by region or supplier acquisition (Nalco is now part of Ecolab ), verifying you have the correct document is the first step.

Check the Manufacturer:

Ensure the document lists Nalco Company or Ecolab . Note: If your document is old, it may still say "Nalco" on the letterhead. New documents will likely feature Ecolab branding. nalco 73385 msds verified

Verify the Product Code:

Confirm the code 73385 is explicitly listed. Check the product name (often "Anionic Flocculant" or "Liquid Polymer").

Check the Revision Date:

Regulations (OSHA GHS) changed significantly around 2015. If your MSDS is dated before 2015, it is obsolete . You must obtain a current GHS-compliant SDS. Action: Go to the Ecolab Nalco Water SDS Portal (ecolab.com) to download the most recent version.

Phase 2: Key Sections to Review (The "Verification Checklist") Once you have the current SDS, verify the following critical data points to ensure safe handling. 1. Hazard Identification (Section 2)

Signal Word: Typically "Warning" for this class of polymer. Hazards: Look for "Causes skin irritation" and "Causes serious eye irritation." Note on Acrylamide: While these polymers are synthesized from acrylamide monomer, the finished polymer is generally non-toxic. However, verify if the SDS lists trace residual acrylamide. If present in trace amounts, long-term health risks are low, but proper PPE is still required. Based on the chemical identity of Nalco 73385

2. Composition (Section 3)

Chemical Family: Polyacrylamide / Polyacrylate. CAS Number: Verify the CAS number matches the product specification (often proprietary mixtures, but look for references to anionic polyacrylamide).